| 1. | Thermometer for fresh water outlet
淡水出口温度计 |
| 2. | Never try to install any on off control valve at my water outlet or shower head
早前还想在我的出水位和花洒头加装开关水掣呢！ |
| 3. | Disconnect water piping connections to the cold water inlet and the hot water outlet . disengage the heater from the wall bracket
在冷水和热水接口处拆下水管。从墙支架上拆除热水器。 |
| 4. | This causes increased cycling of the heater elements and can result in increased water temperatures at the hot water outlet
这将增加加热元件的周期性工作频率，并可能导致热水出水口处水温升高。 |
| 5. | And safe water outlets , including boreholes and protected natural springs , can be constructed by the thousands within a year
而安全的水源，包括钻井与受保护的自然泉水，在一年内便可以挖掘数千个。 |
| 6. | Connection between handrail and platform beam shall be welding . it shall be 8mm weld around the base plate of past on side . there shall be gap for water outlet
立柱与扶手管、横杆间采用销钉固定或焊接固定的方式，具体的连接方式见后面的的详细要求。 |
| 7. | The goal is to control the water outlet temperature by manipulating the flow rate of the steam and control the water inlet rate by manipulating the height of the water level in the water tank
本文中，换热器的控制任务主要有两个，首先通过控制水箱进口水阀门开度，进而控制水箱水位，进而控制换热器进口水流量。 |
| 8. | A building plumbing system includes two components , the piping that brings potable water into the building and distributes it to all fixtures and water outlets and the piping that collects the water after use and drains it to a point of safe disposal
大厦配管系统包括二个组分,带领饮用水进入大厦的管道系统并且分布它对所有装置和水出口和收集水使用后和排泄它对点安全处置的管道系统。 |
| 9. | Standard features include : 3 ” waste outlet valve , left side service , 2 ” fresh water outlet valve , sight glasses , hose bracket , strap tie - down brackets , bumper hitch , rear mud - flaps , wand holster , unique baffle design , keyed locking cabinets
标准系统包括: 3 "大小排污口阀,左边服务系统, 2 "大小清水阀、视镜、软管支架、捷牵制下拉支架、防撞缓冲器、后方泥瓣、棒皮套、独特设计挡板、可锁壁柜。 |
| 10. | The flow behavior of resin , water outlet structure at bottom of the mixed bed , water inlet position of hydraulic transportation , water intake ratio , and pneumatic transportation etc . have been analysed , giving out optimal selection of them combined with reality in the field
对树脂的流动性能、混床底部出水结构、水力输送进水位置、进水比例以及气力输送等进行了分析，并结合实际给出了最佳选择。 |
